Need help?Do you have a question about the Zanotti Z200 and is the answer not in the manual?
General| Brand | Zanotti |
|---|---|
| Model | Z200 |
| Category | Cooling boxes |
| Language | English |
Outlines essential safety instructions and obligations for personnel during unit installation.
Provides detailed measurements for various models and installation types.
Provides detailed dimensions for the Z200 unit when installed in a nose configuration.
Details the dimensions for the Z200 unit when mounted on the roof.
Specifies the dimensions for the Z250 unit in a nose-mounted installation.
Presents the dimensions for the Z250 unit when installed on the roof.
Outlines the dimensions for the Z350 unit during nose installation.
Provides dimensional data for the Z350 unit in a roof-mounted configuration.
Details the dimensions for the Z380 unit for nose installation.
Specifies dimensions for the Z380 unit when installed on the roof.
Guides on the installation process of the road compressor, noting it's supplied separately.
Provides comprehensive steps for installing the condenser unit.
Details the steps for installing the condenser unit in a "nose-mounted" configuration.
Describes the critical steps for verifying system integrity and achieving proper vacuum levels.
Details the process and calculation for correctly loading oil into the refrigeration system.
Outlines the procedure for charging the system with the correct type and amount of refrigerant.
Provides detailed steps for adjusting the CPR valve to regulate maximum suction pressure.
Details the procedure for adjusting the expansion valve for optimal performance.
Lists all critical checks and tests to perform before finalizing the unit installation and operation.
To Next Page
