Zanotti Z200 - Required Tools for Unit Installation

Refrigeration unit
Series Zero Direct-Drive
Z200 | Z250 | Z350 | Z380
Z380 Multi
INSTALLATION MANUAL
rev.01
37
3 INSTALLATION
3.1 Tools required
Before proceeding with the installation of the unit on the truck, it is necessary to check that you have the
following tools available:
• Protective goggles and PPE
• Drill
• Drill bits
• Tape Metro
• Mechanical tools
• Ladder
• Work platform
• Lifting device
• Vacuum pump
• Dry nitrogen
• Torque wrench
• Torch
• Leak detector
DANGER
Always wear the appropriate PPE.