Why my Zanussi Cookers oven does not heat up?
If your Zanussi cooker won't heat up, first ensure that the oven is activated. If it is still not heating, check if the clock is set, as the oven may not operate if the clock hasn't been set. Finally, verify that all necessary settings are correctly configured.
What to do if my Zanussi Cookers display shows 12 00?
If the display of your Zanussi hob shows "12.00", it indicates there was a power cut. You should reset the clock.
What to do if my Zanussi Cookers hob beeps and deactivates?
If an acoustic signal sounds and the Zanussi hob deactivates (or sounds upon deactivation), it means something is on one or more sensor fields. Remove the object from the sensor fields.
Why Zanussi Cookers Automatic Heat Up function does not operate?
If the Automatic Heat Up function on your Zanussi hob isn't working, it could be because the zone is already hot; let it cool down sufficiently. Alternatively, the highest heat setting might be set, which has the same power as the function.
Why sensor fields become hot on my Zanussi Cookers?
If the sensor fields on your Zanussi hob become hot, it's likely because the cookware is too large or too close to the controls. If possible, place large cookware on the rear zones.
How to fix Zanussi ZCI66280WA that you cannot activate?
If you cannot activate your Zanussi cooker, ensure it's correctly connected to the electrical supply. Also, check the fuse. If the fuse is blown repeatedly, contact a qualified electrician.
Why I cannot activate or operate my Zanussi ZCI66280WA Cookers hob?
If you cannot activate or operate the Zanussi hob, avoid touching two or more sensor fields simultaneously; touch only one. Also, clean the control panel if there are water or fat stains.
Why steam settles in my Zanussi Cookers oven?
If steam and condensation settle on the food and in the cavity of your Zanussi oven, avoid leaving dishes in the oven for more than 15-20 minutes after cooking ends.
Why residual heat indicator does not come on Zanussi ZCI66280WA Cookers?
If the residual heat indicator on your Zanussi hob doesn't come on, it could be because the zone hasn't been hot for very long. If the zone was hot enough and the indicator still fails, consult an Authorised Service Centre.
General| Fuel Type | Electric |
|---|---|
| Oven Capacity | 72 L |
| Number of Ovens | 1 |
| Number of Oven Cavities | 1 |
| Hob Type | Ceramic |
| Number of Cooking Zones | 4 |
| Number of Burners/Zones | 4 |
| Energy Rating | A |
| Energy Efficiency Class | A |
| Dimensions (H x W x D) | 900 x 600 x 600 mm |
| Width | 60 cm |
| Colour | White |
| Max Temperature | 250 °C |
| Timer | Yes |
| Cooling Fan | Yes |
| Door Glass Layers | 2 |
| Oven Functions | Conventional, Grill, Fan |
| Cleaning System | Catalytic |
| Height | 90 cm |
| Depth | 60 cm |
To Next Page
