Why Zanussi Dishwasher is not filling with water and shows i10 or i11?
If your Zanussi Dishwasher is not filling with water and the display shows i10 or i11, make sure the water tap is open and that the water supply pressure is adequate. Check that the water tap and the filter in the inlet hose are not clogged. Also, ensure the inlet hose has no kinks or bends. If the water pressure is too low, contact your local water authority.
What to do if my Zanussi ZDF26004WA doesn't drain and shows i20?
To address the issue of the Zanussi Dishwasher not draining water and displaying the i20 error, ensure that the sink spigot is not clogged. Also, check that the interior filter system is not clogged and that the drain hose has no kinks or bends.
What to do if my Zanussi ZDF26004WA Dishwasher does not drain the water?
If your Zanussi Dishwasher won't drain water and the display shows an error, check to make sure the sink spigot is not clogged. Also, ensure that the filters in the outlet hose and the interior filter system are clear of any blockages. Finally, verify that the drain hose is free from any kinks or bends.
Why is my Zanussi ZDF26004WA Dishwasher not filling with water?
If your Zanussi Dishwasher is not filling with water and the display shows an error, make sure the water tap is fully open. Check that the water supply pressure is adequate by contacting your local water authority. Also, inspect the water tap, the filter in the inlet hose, and the inlet hose itself to ensure they are free from clogs, kinks, or bends.
General| Type | Freestanding |
|---|---|
| Place Settings | 13 |
| Energy Efficiency Class | A+ |
| Number of Programmes | 5 |
| Delay Start | Yes |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Color | White |
| Half Load Option | Yes |
To Next Page
