To Next Page
A
Abigail DawsonAug 15, 2025
Why does my Zanussi ZIT6460XB Hob keep turning off?
- YysanchezAug 15, 2025
If your Zanussi hob deactivates, it means that you put something on the sensor field. Remove the object from the sensor field.
Why does my Zanussi ZIT6460XB Hob keep turning off?
If your Zanussi hob deactivates, it means that you put something on the sensor field. Remove the object from the sensor field.
Why isn't Automatic Heat Up working on my Zanussi ZIT6460XB Hob?
If Automatic Heat Up does not operate on your Zanussi hob, it could be because the zone is already hot. Allow the zone to cool down sufficiently. It could also be because the highest heat setting is set, as it has the same power as the Automatic Heat Up function.
How to fix Zanussi ZIT6460XB that won't turn on?
If your Zanussi Hob won't activate or operate, check the following: * Ensure the hob is correctly connected to the electrical supply, referring to the connection diagram. * Verify the fuse isn't blown. If it repeatedly blows, contact a qualified electrician. * Activate the hob again and set the heat setting in less than 10 seconds. * Touch only one sensor field at a time. * Clean the control panel if there's water or fat stains.
Why is my Zanussi Hob beeping constantly?
If you hear a constant beep noise from your Zanussi Hob, it may be due to an incorrect electrical connection. Disconnect the hob from the electrical supply and ask a qualified electrician to check the installation.
What to do if Zanussi ZIT6460XB deactivates with acoustic signal?
If your Zanussi hob deactivates and an acoustic signal sounds, it means that you put something on one or more sensor fields. Remove the object from the sensor fields.
Why are the sensor fields on my Zanussi ZIT6460XB so hot?
If the sensor fields of your Zanussi hob become hot, it could be because the cookware is too large or placed too near the controls. If possible, put large cookware on the rear zones.
Why doesn't the residual heat indicator turn on my Zanussi ZIT6460XB?
If the residual heat indicator on your Zanussi hob does not come on, it may be because the zone was not hot enough, because it operated only for a short time, or the sensor is damaged. If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre.
What does it mean when my Zanussi Hob shows and a number?
If the Zanussi hob displays and a number, there may be an error. Deactivate the hob and activate it again after 30 seconds. If it comes on again, disconnect the hob from the electrical supply for 30 seconds, then reconnect it. If the problem continues, speak to an Authorised Service Centre.
What does it mean when my Zanussi ZIT6460XB displays ?
If the Zanussi hob displays , it could be due to the following reasons: * There is no cookware on the zone. Put cookware on the zone. * The cookware is unsuitable. Use suitable cookware. Refer to "Hints and tips". * The diameter of the bottom of the cookware is too small for the zone. Use cookware with correct dimensions. Refer to "Technical data".
General| Type | Induction Hob |
|---|---|
| Number of Cooking Zones | 4 |
| Width | 60 cm |
| Control Type | Touch |
| Power Levels | 9 |
| Frame Type | Frameless |
| Timer | Yes |
| Total Power | 7400 W |
| Boost Function | Yes |
| Residual Heat Indicator | Yes |
| Installation | Built-in |
| Color | Black |
| Safety Features | Automatic safety switch off |
| Dimensions (WxD) | 590 x 520 mm |
