EasyManua.ls Logo

Zanussi ZIL6470CB - User Manual

Zanussi ZIL6470CB
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GETTING
STARTED?
EASY.
User Manual
ZIL6470CB
EN User Manual
Hob

Table of Contents

Questions and Answers

  • M
    mendezjillAug 6, 2025
    How to fix Zanussi Hob if it won't turn on?
    • P
      pennybarnettAug 7, 2025
      If your Zanussi Hob won't activate or operate, here's what to check: * Ensure the hob is correctly connected to the electrical supply, consulting the connection diagram. * Verify the fuse isn't blown. If it repeatedly blows, contact a qualified electrician. * Activate the hob and set the heat setting within 10 seconds. * Touch only one sensor field at a time. * Clean the control panel if there's water or fat stains.
  • T
    Taylor MckinneyAug 10, 2025
    Why is my Zanussi Hob beeping constantly?
    • L
      Lance SandersAug 11, 2025
      If you hear a constant beep from your Zanussi hob, it might be due to an incorrect electrical connection. Disconnect the hob from the power supply and have a qualified electrician inspect the installation.
  • J
    Jesse McphersonAug 15, 2025
    What to do if my Zanussi ZIL6470CB is beeping and turning off?
    • C
      Carolyn AshleyAug 15, 2025
      If your Zanussi hob deactivates and an acoustic signal sounds (or sounds when deactivating), it means something is likely on one or more of the sensor fields. Remove any objects from the sensor fields.
  • K
    karenmckeeAug 19, 2025
    What to do if my Zanussi ZIL6470CB shows an error?
    • B
      Brandon DavidAug 20, 2025
      Deactivate the Zanussi hob and activate it again after 30 seconds. If the error comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre.
  • J
    Jennifer ButlerAug 25, 2025
    Why isn't the residual heat indicator on my Zanussi Hob working?
    • C
      Cody WilliamsAug 25, 2025
      If the residual heat indicator on your Zanussi hob isn't turning on, it could be because the zone hasn't been hot long enough, or the sensor might be damaged. If the zone was hot for a sufficient period, contact an Authorised Service Centre.
  • S
    Scott HenryAug 27, 2025
    Why are the sensor fields on my Zanussi Hob getting hot?
    • P
      parkerevanAug 27, 2025
      If the sensor fields on your Zanussi hob are becoming hot, it could be that your cookware is too large or placed too close to the controls. If possible, place larger cookware on the rear zones.
  • S
    stevensonerinSep 1, 2025
    Why doesn't Automatic Heat Up work on my Zanussi ZIL6470CB Hob?
    • M
      Michael HermanSep 1, 2025
      Automatic Heat Up on your Zanussi hob won't work if the zone is already hot. Allow the zone to cool down sufficiently. Also, this function does not operate on the highest heat setting, as it has the same power.

Zanussi ZIL6470CB Specifications

General IconGeneral
Number of Cooking Zones4
Control TypeTouch
Width59 cm
ColorBlack
MaterialGlass Ceramic
Residual Heat IndicatorYes
Safety ShutdownYes
Dimensions (W x D x H)590 x 520 x 55 mm
TypeInduction Hob
Total Power7400 W

Related product manuals