EasyManua.ls Logo

Zanussi ZIT6470CB - User Manual

Zanussi ZIT6470CB
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GETTING
STARTED?
EASY.
User Manual
ZIT6470CB
EN User Manual
Hob

Table of Contents

Questions and Answers

  • D
    Don DiazAug 13, 2025
    How to fix Zanussi ZIT6470CB Hob if it won't turn on?
    • H
      Hannah GregoryAug 13, 2025
      If your Zanussi Hob won't activate or operate, here's what to check: * Ensure the hob is correctly connected to the electrical supply, consulting the connection diagram. * Verify the fuse isn't blown. If it repeatedly blows, contact a qualified electrician. * Activate the hob and set the heat setting within 10 seconds. * Touch only one sensor field at a time. * Clean the control panel if there's water or fat stains.
  • J
    Jared KirkAug 16, 2025
    Why is my Zanussi ZIT6470CB beeping constantly?
    • P
      phayesAug 16, 2025
      If you hear a constant beep from your Zanussi hob, it might be due to an incorrect electrical connection. Disconnect the hob from the power supply and have a qualified electrician inspect the installation.
  • C
    Christina CollinsAug 20, 2025
    What to do if my Zanussi ZIT6470CB Hob shows an error?
    • E
      eric59Aug 20, 2025
      Deactivate the Zanussi hob and activate it again after 30 seconds. If the error comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre.
  • E
    Elizabeth LewisAug 25, 2025
    What to do if my Zanussi Hob is beeping and turning off?
    • W
      wcollinsAug 25, 2025
      If your Zanussi hob deactivates and an acoustic signal sounds (or sounds when deactivating), it means something is likely on one or more of the sensor fields. Remove any objects from the sensor fields.
  • J
    Joanna MooreAug 28, 2025
    Why does my Zanussi ZIT6470CB keep turning off?
    • M
      Melissa DavisAug 28, 2025
      If your Zanussi hob deactivates, it is possible that you have put something on the sensor field. Remove the object from the sensor field.
  • S
    Sharon SteeleAug 31, 2025
    Why are the sensor fields on my Zanussi ZIT6470CB getting hot?
    • C
      Craig WareAug 31, 2025
      If the sensor fields on your Zanussi hob are becoming hot, it could be that your cookware is too large or placed too close to the controls. If possible, place larger cookware on the rear zones.
  • E
    Eileen BradleySep 4, 2025
    Why isn't the residual heat indicator on my Zanussi Hob working?
    • M
      Molly YoungSep 4, 2025
      If the residual heat indicator on your Zanussi hob isn't turning on, it could be because the zone hasn't been hot long enough, or the sensor might be damaged. If the zone was hot for a sufficient period, contact an Authorised Service Centre.
  • C
    Carol OlsonSep 8, 2025
    Why doesn't Automatic Heat Up work on my Zanussi ZIT6470CB Hob?
    • S
      savannahmackSep 8, 2025
      Automatic Heat Up on your Zanussi hob won't work if the zone is already hot. Allow the zone to cool down sufficiently. Also, this function does not operate on the highest heat setting, as it has the same power.

Zanussi ZIT6470CB Specifications

General IconGeneral
TypeInduction
Number of Cooking Zones4
Width59 cm
Control TypeTouch
Power Levels9
ColourBlack
Boost FunctionYes
Child Safety LockYes
Residual Heat IndicatorYes
TimerYes
Power Slide ControlYes
Installation TypeBuilt-In
Safety FeaturesAutomatic switch-off
Total Power7400 W
Dimensions (WxD)590 x 520 mm

Related product manuals