EasyManuals Logo

zapco STUDIO 100 User Manual

zapco STUDIO 100
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Warnings
ZAPCO highly recommends that a system protection device
(i.e., fuse or circuit breaker) be placed within 18” of the battery.
Although ZAPCO products have adequate internal protection, it
is possible that power wiring could become pinched between
the component and the battery - potentially resulting in a fire.
The system protection device should be placed where it can be
accessed easily and all wiring should be routed safely and
correctly according to the following guidelines:
Do not run wiring close to hot or spinning objects.
Always use wire grommets when routing wire through the
firewall or any other metal panels.
Make sure that the potential for pinched wiring is avoided
by routing all wires away from moving hinges and seats.
This also includes brake, gas and clutch pedals, hood and
trunk hinges, etc.
Caution:
Continuous exposure to excessive sound pressure levels may
cause permanent hearing loss. ZAPCO strongly advises that
you use common sense when setting volume levels.
7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the zapco STUDIO 100 and is the answer not in the manual?

zapco STUDIO 100 Specifications

General IconGeneral
Brandzapco
ModelSTUDIO 100
CategoryAmplifier
LanguageEnglish

Related product manuals