Zapi SEM-Zero User Manual

Page 33
6.3 DESCRIPTION OF THE CONSOLE SAVE FUNCTION
The SAVE PARAM function allows the operator to transmit the Parameter values and
Configuration data of the chopper into the Console memory. It is possible to load 64
different programmes.
The information saved in the Console memory can then be reloaded into another chop-
per using the RESTORE function.
The data that is available via the SAVE function is as follows:
- All Parameter Values (PARAMETER CHANGE).
- Options (SET. OPTIONS).
- The Level of the Battery (ADJUST BATTERY).
Flow Chart showing how to use the SAVE function of the Digital Console.
1) Opening Zapi Display.
2) Press ENTER to go into the General menu.
3) The Display will show :
4) Press either ROLL UP or ROLL DOWN button until
SAVE PARAM. is shown.
5) The Display will show :
6) Press ENTER to go into the SAVE function.
7) If this facility has been used before the type
of chopper data stored appears on the top line with
a 2 digit reference.
8) Keep pressing either ROLL UP or ROLL DOWN keys until
the second line indicates a FREE storage facility.
9) Press ENTER to commence SAVE routine.
10) You can see the items that are being stored whilst
the SAVE routine is happening.
11) When finished, the Console shows :
12) Press OUT to return to the Opening Zapi Display.
MENU

Zapi SEM-Zero Specifications

General

Brand	Zapi
Model	SEM-Zero
Category	Controller
Language	English