Zapi SMART CONSOLE User Manual

ELECTRONIC • OLEODYNAMIC • INDUSTRIAL
EQUIPMENTS CONSTRUCTION
Via Parma, 59 – 42028 – POVIGLIO (RE) – ITALY
Tel +39 0522 960050 (r.a.) – Fax +39 0522 960259
e-mail: zapi@zapispa.it – web: www.zapispa.it
User Manual
SMART
CONSOLE
EN

Zapi SMART CONSOLE Specifications

General

Category	Controller
Type	Smart Console
Storage temperature	-40°C to +85°C
Communication	CANbus
Protection Rating	IP65
Manufacturer	Zapi

Summary

Smart Console Overview

Console Features and Specifications

Operational Ratings (Electrical & Environmental)

Operational Modes (Serial & CAN)

Firmware Update Procedure

Procedure and reasons for updating the Smart Console firmware.

Quick Start Guide

Console Layout and Controls

Identifies the display, keyboard, main connector, and USB connector.

Using Internal Batteries

Instructions on inserting, using, and managing internal AA batteries.

Serial Connection Operation

Connecting and operating the console via serial interface with internal batteries.

CAN Connection (Internal Batteries)

Connecting and operating the console via CANBUS with internal batteries.

CAN Connection (External Supply)

Connecting and operating the console via CANBUS using an external power source.

Special Functions

Download Parameters to USB Stick

Procedure to save controller parameters onto a USB stick in CSV format.

CAN Traffic Datalogging

Saving CAN messages to a USB stick in TXT format for analysis.

Forced Reset Procedure

Console Menu Functions

Console Parameters Settings

Password Management and Security

Enabling and using a password to protect console parameters from unauthorized access.

Alarms and Icons

Read-Only Mode Warning

Battery Low Warning

Hardware Alarms

Periodic Maintenance Schedule