To Next PageTo Next Page
Need help?Do you have a question about the Zapi ADPZP0CC and is the answer not in the manual?
General| Brand | Zapi |
|---|---|
| Model | ADPZP0CC |
| Category | Controller |
| Language | English |
Lists key technical specifications like voltage, inputs, outputs, and protection rating.
Describes digital/analog inputs, encoder, and voltage/current outputs for Mhyrio Flash.
Details required installation materials, including cable specs and fuse types for proper setup.
Crucial safety precautions for installing the controller hardware and connecting to the battery.
Explains CAN bus wiring best practices to prevent interference and ensure data integrity.
Guides on correct I/O connections, insulation, and protection features like IP64 rating.
Covers safety standards, high-side switch functionality, and EMC/ESD mitigation strategies.
Describes Mhyrio Flash operation within a CAN-BUS system, managing valves and inputs.
Details pin assignments and functions for the 22-pin CNA connector.
Details pin assignments and functions for the 6-pin CNB connector.
Details pin assignments and functions for the 6-pin CNC connector.
Details pin assignments and functions for the 4-pin CND connector.
Details pin assignments and functions for the 8-pin CNE connector.
Details pin assignments and functions for the 10-pin CNF connector, including software version selection.
Details pin assignments for proportional electrovalve outputs on the 16-pin CNG connector.
Provides dimensional and physical layout details of the controller unit.
Illustrates internal logic and signal flow for Mhyrio controller functions.
Explains how to connect and use the digital console for parameter adjustments.
Outlines the standard menu structure for parameter configuration and testing.
Describes setting valve types, battery types, and voltage parameters.
Provides a flowchart for navigating console menus to change parameters.
Lists and describes adjustable parameters like MIN/MAX current and delays.
Presents a table of programmed levels for acceleration and deceleration delays.
Explains using the console's tester function to measure signals in real-time.
Discusses save/restore functions with caveats on their reliability.
Describes connecting the console to different ZAPI products via CAN-BUS.
Explains accessing and interpreting alarm history and diagnostic codes.
Details common alarm codes like EEPROM KO, CAN BUS KO, and driver faults for troubleshooting.
Lists part numbers and descriptions for essential spare connectors and harnesses.
Outlines periodic maintenance tasks, frequency, and safety warnings for qualified personnel.
