Page - 42/50 AFGZP0BA – SMART CONSOLE - User Manual
6 MENU CONSOLE
The HOME SCREEN has an additional menu called MENU CONSOLE. This
menu contains various parameters and functions which are related to the console
only. For this reason, this menu is always accessible independently of
communication mode (serial or CAN) and power supply.
MENU CONSOLE has the following appearance
Next sections discuss each function, one by one.
6.1 Console parameter
This menu contains parameters which control console behaviour.
Password enable
See section 6.5 about password use.
Serial baud rate
It defines the preferred speed of the serial connection.
Default value is 9600bps and it should be modified rarely.
Larger speeds will improve reactivity of console when connected to recent Zapi
products.
On the contrary older controller may fail the connection handshake or they may
exhibit disconnections.
Autorepeat Start and Autorepeat
When a button is kept pushed, its corresponding action will be repeated and
accelerated over time.
For example, to increase a parameter from 0 to 100, it is possible to keep
pushing the right button while the parameter value is increased quickly.
Autorepeat Start: decrease this value (in milliseconds) to increase the
acceleration effect. It affects only the beginning of the acceleration (button
To Next Page
Loading...
Need help?
General
