Need help?Do you have a question about the ZAPTEC HOME and is the answer not in the manual?
General| Charging Mode | Mode 3 |
|---|---|
| Connector Type | Type 2 |
| Compatibility | All EVs with Type 2 connector |
| IP Rating | IP54 |
| Product Type | EV Charger |
| Input Voltage | 230V AC ± 10% |
| Input Current | Up to 32A |
| Output Voltage | 230V AC |
| Output Current | Up to 32A |
| Connectivity | WiFi, Bluetooth |
| Charging Cable Length | Not applicable (socket only) |
| Protection | Overcurrent protection, Overvoltage protection, Undervoltage protection, Over temperature protection |
| Installation | Wall-mounted |
| Operating Temperature | -30°C to +50°C |
| Safety Standards | IEC 61851-1 |
Read and implement all safety instructions to avoid invalidating the warranty and ensure proper product use.
Detailed explanation of status indicator colours (WHITE, GREEN, BLUE, RED, YELLOW, PURPLE) and their meanings.
Step-by-step guide for initiating a charging session with the ZAPTEC HOME station.
Procedure for starting charging using RFID tags or charging cards for user authentication.
Instructions on how to safely interrupt and end a charging session.
Guide to accessing and interpreting error codes for the charging station via the ZAPTEC App.
Solutions for common problems like 'No light', 'White/blue light', 'Yellow flashing light', and 'Red light'.
To Next Page
