Step 8 Close the media access door.
Step 9 Change the printer mode switch to “Batch”.
Press the CANCEL button to initiate batch label
processing for media rewinding.
Step 10 Load media as required. Configure the printer
for the selected media with the AutoSense rou
-
tine or programming. Continuous media and
black line or mark media require programming
for proper configuration.
Step 11 Configure the printer for cutting with program
-
ming. See the programmer’s manual for details
on setting and canceling cutter printer com
-
mand settings.
Using the Media Cutter
C-8 980412-001 Rev.A
PEEL
BATCH
CANCEL
To Next Page
Loading...
