Models
There are several models of the printer, each of which look similar but have different ribbon and
media handling features.
LP models print using direct thermal media
only. The top case is flat.
TLP models print using either direct thermal or
thermal transfer media. The top case flares at
the front to enclose the carriage and ribbon
spool hubs.
There are models that can handle up to
four-inch (102 mm) wide media and those that
can handle up to two-inch (51 mm) wide
media.
All printers also have optional media handling
functions such as the dispensers to present a
single label already peeled from the backing or
cutters to present a single label snipped from
the roll.
The power supply and firmware also are
characteristics of the printer model and allow
the printer to be used in various countries.
2 980358-001 Rev. B
To Next Page
Loading...
Need help?
General
