Zebra 402 User Manual

Top Cover Replacement - LP 2844 (continued) 980358-214A
5. Route the left print head wires through the hinge & and the right print head wires and PCBA
ribbon cable through lower frame '.
6. Align the hinge in place and use a #1 Phillips to tighten the single screw that holds it.
Assembling the Printer
Perform the assembly steps of the Main PCBA (980358-409) and Bottom Case (980358-405)
replacement procedures.
980358-001 Rev. B 21

Zebra 402 Specifications

General

Brand	Zebra
Model	402
Category	Printer
Language	English