Zebra CPCL - ON-OUT-OF-PAPER Command

Mobile Printer CPCLProgramming Manual P8-15
ON-OUT-OF-PAPER Command
This command can be issued to instruct the printer as to
the course of action to take when it encounters an error
while printing the label (such as running out of stock)
format: {command} {action} {number of retries}
where: { command}: ON-OUT-OF-PAPER
{action}: Choose one of the following:
PURGE: Discard the label if print error is
encountered after the specified number of
attempts.
WAIT: Do not discard the label if print error is
encountered. In this mode the printer will
wait for the error to be corrected before
making the next print attempt.
{number of retries}: n: Specify how many times the
printer should attempt to print
the label.
The default printer configuration is:
ON-OUT-OF-PAPER PURGE 2
ON-OUT-OF-PAPER Command Example
This example instructs the printer to attempt to print the
label twice.
Input (OOP.LBL):
! 0 200 200 150 1
ON-OUT-OF-PAPER WAIT 2
TEXT 5 0 0 20 MAKE TWO ATTEMPT
FORM
PRINT