Zebra CPCL - SETSP Command

P8-14 Mobile Printer CPCLProgramming Manual
SETSP Command
The SETSP command is used to change spacing be-
tween text characters.
Format:
{command} {spacing}
where:
{command}: SETSP
{spacing}: Unit measurement between characters.
The default for spacing is zero. Note
that this command is affected by the
UNITS command setting.
Input (SETSP.LBL):
! 0 200 200 210 1
T 4 0 0 10 Normal Spacing
SETSP 5
T 4 0 0 50 Spread Spacing
SETSP 0
T 4 0 0 90 Normal Spacing
FORM
Output:
SETSP CommandExample