P8-32 Mobile Printer CPCLProgramming Manual
MCR Commands
These commands (MCR, MCR-QUERY and MCR-CAN)
can be used to configure and activate the optional Mag-
netic Card Reader (MCR). The MCR commands will be
ignored by printers that are not equipped with a Magnetic
Card Reader.
The MCR command can be issued in a label file (! 0
200 … PRINT), or in a utilities command session (!
UTILITIES … PRINT). Refer to the discussion of the
MCR commands in Section 10 (Advanced Utilitiies) of
this manual for complete information on using the MCR
option.
To Next Page
Loading...