P10-26 Mobile Printer CPCLProgramming Manual
mand is issued. The only exception to
this rule is when MCR is in MULTIPLE
read mode. See below for description of
MULTIPLE read mode. A time-out of 0
will instruct the printer to never time-out,
and wait for a successful read.
{options}: The options listed below can be
specified in any order, and must be
separated with spaces. The last option
must be terminated with cr/lf (carriage-
return / line-feed) characters. Options
are accumulative, meaning that “MCR
10 ERRORS T1” and “MCR 40 T2” are
equivalent to “MCR 40 ERRORS T1 T2”.
The time-out field is not accumulative,
and only the last specified time-out is
used. Select from the following options:
Track Options:
T1 :Read Track 1. (can specify one or
more tracks to read).
T2 :Read Track 2.
T3: Read Track 3. (Currently not sup-
ported)
Frequency Options:
MULTIPLE: Read multiple swipes. MCR
will continue to read and report card
swipes until the MCR times out.
SINGLE read is the default mode.
SINGLE: Read and report one success-
ful card swipe. No data will be reported
continued
To Next Page
Loading...