Mobile Printer CPCLProgramming Manual P10-27
if the MCR times out before a successful
read. SINGLE read is the default read
frequency mode.
Data Reporting Options
QUERY: Report MCR data when que-
ried (In response to MCR-QUERY
command, see MCR-QUERY.). By
default, the printer will report MCR data
when valid MCR data is decoded before
the MCR times out.
Debugging Options
ECHO: The printer will print the MCR
data by internally routing it to the line-
printer module, forcing the data to be
printed, as well as being transmitted to
the host computer.
Track Data Transmit Options
PREFIX prefix: This option specifies the
track data prefix. The printer defaults to
no prefix. The PREFIX command should
be followed by the data that needs to be
sent from the printer to the host, up to
10 characters, and terminated with
space or carriage-return/line-feed char-
acters. An example of a typical prefix
option is “PREFIX START:”.
POSTFIX postfix: This option specifies
the track data postfix. The printer de-
faults to no postfix. The POSTFIX com-
mand should be followed by the data
To Next Page
Loading...