Mobile Printer CPCLProgramming Manual P10-47
SRF-ACCESS and END-SRF-ACCESS Commands
Commands intended to modify the BHT operating modes
must be placed between the SRF-ACCESS and the
END-SRF-ACCESS command lines.
SRF- and END-SRF-ACCESS Command Example
This autoexec.bat file uses the SRF-ACCESS and END-
SRF-ACCESS command pair to establish BHT communi-
cation via the BHT-CABLE protocol.
Input: PROBHT.CBL
! DF AUTOEXEC.BAT
! UTILITIES
SRF-ACCESS
BHT-PROTOCOL BHT
BHT-PROTOCOL CABLE
BHT-BAUD 19200
BHT-MODE STRIP-ADD-CRLF
END-SRF-ACCESS
PRINT
continued
To Next Page
Loading...
