P2-4 Mobile Printer CPCLProgramming Manual
FORM Command
The FORM command instructs the printer to feed to top
of form after printing.
Format:
{command}
where:
{command}:
FORM
In the following example, the printer will execute a form
feed after the label is printed. See the SETFF (set form
feed) command in the section on designing receipts and
lists for information on setting printer behavior when the
FORM command is executed.
Input: FORM.LBL
! 0 200 200 3 1
IN-CENTIMETERS
CENTER
TEXT 4 1 0 .5 Form Command
FORM
PRINT
To Next Page
Loading...