Zebra CPCL - PRINT Command

Mobile Printer CPCLProgramming Manual P2-3
PRINT Command
The PRINT command terminates and prints the file. This
must always be the last command (except when in Line
Print Mode). Upon execution of the PRINT command,
the printer will exit from a control session. Be sure to
terminate this and all commands with both carriage-
return
and line-feed characters.
Format:
{command}
where:
{command}: PRINT
PRINTER Command Example
Input (HELLO.LBL):
! 0 200 200 210 1
TEXT 4 0 30 40 Hello World
FORM
PRINT
Output: