P12-6 Mobile Printer CPCLProgramming Manual
DHCP is enabled, the WLAN card will attempt to ob-
tain an IP address from a DHCP server. If DHCP is
disabled, the WLAN card will use the IP address pro-
grammed into its non-volatile storage.
Syntax: DHCP
{option}
Where
{option}
= ON or OFF
Example: ! U1 LAN DHCP ON
DHCP-SAVE – This operation allows for control of the
storing of addresses obtained by DHCP. If ON, a new
address obtained from DHCP will be stored. If OFF,
the new address will be used for this session only,
leaving the previously stored address unchanged.
Syntax: DHCP-SAVE
{option}
Where
{option} =
ON or OFF
Example: ! U1 LAN DHCP-SAVE ON
DHCP-TIMEOUT – This operation allows for control of
number of times the DHCP client will attempt to ob-
tain an address from the DHCP server. The argument
is the number of times the client will make a request
before giving up. The client can be told to never give
up by making the argument 0.
Syntax: DHCP-TIMEOUT {0 – 15}
Example: ! U1 LAN DHCP-TIMEOUT 5
PORT – This operation allows for setting of the TCP
port that the printer will listen on while in TCP mode.
Syntax: PORT {PortNumber}
Example: ! U1 LAN PORT 515
To Next Page
Loading...