P12-8 Mobile Printer CPCLProgramming Manual
ipAdr = (your IP address)
associated = YES
protocol = LPD
essID = (Your SSID)
DHCP = OFF
If there is no Wireless Communications section or the pa-
rameter values do not match what is expected, please re-
fer to the Network Printer Troubleshooting discussion at
the end of this section.
Details of this method of setting the IP address are cov-
ered earlier in this section in the discussions of the
IPADDR, SSID and MODE operations.
LAN Command Response
If an operation unsupported by the LAN command is
given, the printer will generate the following message:
***Invalid LAN option {operation}
where {operation} is the invalid operation
If an operation with an option unsupported by the LAN
command is given, the printer will print the following mes-
sage:
Illegal{operation}option {option}
where {option} is the invalid option.
To Next Page
Loading...