Zebra CPCL - Media Parameters

Mobile Printer CPCLProgramming Manual P14-25
Media Parameters
media.sense_mode
type: getvar; setvar
This parameter refers to media sense mode.
getvar result Media sense mode.
Example Description Get current media sense mode.
Syntax ! U1 getvar “media.sense_mode”
Result “bar”
setvar choices “bar”, “gap”
Default “bar”
Example Description Set media sense mode to bar
(black index mark).
Syntax ! U1 setvar “media.sense_mode”
“bar”
Result Printer will switch to bar sense
mode.
media.status
type: getvar
This parameter refers to the paper status.
getvar result “ok”, “out”
Example Description Get current media status.
Syntax ! U1 getvar “media.status”
Result “ok”