Mobile Printer CPCLProgramming Manual P14-29
Odometer Parameters
odometer.label_dot_length
type: getvar
Reports the length of the last label printed (or fed), in
dots. The label dot-length is set to zero when the printer
is turned on. This parameter is updated every time the
printer feeds or prints a label and detects a marker, either
gap or bar, while printing or feeding.
getvar result This will return the length of the last label
printed (in dots)
Example Description This command instructs the printer
to respond with the length of the
last label printed.
Syntax ! U1 getvar
“odometer.label_dot_length”
Result “416”
To Next Page
Loading...