P14-30 Mobile Printer CPCLProgramming Manual
odometer.latch_open_count
type: getvar; setvar
This parameter refers to the number of times the printer’s
latch has been opened. The latch open count can be set
to an initial value and incremented every time the latch is
opened. Typically the latch is opened each time a roll of
media is loaded.
getvar result This will return the number of times the printer’s
latch has been opened
Example Description This command instructs the printer
to respond with the latch_open
count.
Syntax ! U1 getvar
“odometer.latch_open_count”
Result “100”
setvar choices “0” - “65535”
Default “0”
Example Description This command instructs the printer
to set the latch_open count to “0”.
Syntax ! U1 setvar
“odometer.latch_open_count” “0”
Result The user latch open count odom-
eter will be set to 0.
To Next Page
Loading...