P14-32 Mobile Printer CPCLProgramming Manual
odometer.user_label_count
type: getvar; setvar
This parameter refers to the user label count. The user
label counter keeps track of how many labels have been
printed.since the last re-set of the counter. The user’s la-
bel count can be set to an initial value and incremented
every time a label is printed.
Note the difference from this command to the
”odometer.media_marker_count” parameter above.
getvar result This will return the number of labels printed by
the printer
Example Description This command instructs the printer
to respond with the user label
count.
Syntax ! U1 getvar
“odometer.user_label_count”
Result “100”
setvar choices “0” - “65000”
Default “0”
Example Description This command instructs the printer
to set the user label count to 0.
Syntax ! U1 setvar
“odometer.user_label_count” “0”
Result The user label count odometer will
be set to 0.
To Next Page
Loading...