Zebra CPCL - ip.pop3.enable; ip.pop3.password

Mobile Printer CPCLProgramming Manual P14-47
ip.pop3.enable
type: getvar; setvar
This parameter refers to whether the printer will query a
POP3 mailbox for mail.
getvar result This will return the POP3 enable status (on or off)
Example Description This command instructs the printer
to respond with the POP3 setting
Syntax ! U1 getvar “ip.pop3.enable”
Result “on”
setvar choices “on”, “off”
Default “off”
Example Description This command instructs the printer
to disable the POP3 querying.
Syntax ! U1 setvar “ip.pop3.enable” “on”
Result This will turn on the POP3 query-
ing upon cycling the power or
issuing the device.reset.
ip.pop3.password
type: getvar; setvar
This parameter refers to the POP3 mailbox password .
This only applies if ip.pop3.enable is set to “on”.
getvar result Returns the POP3 password set in the printer.
Example Description Instructs the printer to respond with
the POP3 password value
Syntax ! U1 getvar “ip.pop3.password”
Result “password”
setvar choices Text string up to 19 characters in length
Default “password”
Example Description Instructs the printer to change the
POP3 password.
Syntax ! U1 setvar “ip.pop3.username”
“new_password”
Result Changes the password to
new_password. This change will
take effect upon cycling the power
or issuing the device.reset.
continued on next page