P14-46 Mobile Printer CPCLProgramming Manual
ip.netmask
type: getvar; setvar
This parameter refers to the subnet mask address. This
value is ignored if DHCP is enabled.
getvar result This will return the printer’s subnet mask.
Example Description This command instructs the printer
to respond with the subnet mask.
Syntax ! U1 getvar “ip.netmask”
Result “255.255.255.0”
setvar choices Any valid netmask.
Default “255.255.255.0”
Example Description This command instructs the printer
to change the subnet mask to
255.255.0.0.
Syntax ! U1 setvar “ip.netmask”
“255.255.0.0”
Result The subnet mask will be set to
255.255.0.0 upon cycling the
power or issuing the device.reset.
ip.ping_remote
type: do
This parameter directs the printer to ping a specified ad-
dress “x” number of times. The address to be pinged is
set by setvar ip.remote.
do parameters ip address; number of times to ping
Example Description This command instructs the printer
to ping the address set by the
ip.remote
parameter ten times,
Syntax ! U1 do “ip.ping_remote “10”
Result Printer creates a report similar to
the following:
Pinging 10.14.4.162 10 times
Results: 10 of 10 succeeded
Min:20 Max:40 Avg:22
(min/max times in mSec.)
To Next Page
Loading...