Zebra CPCL - Page 291

Mobile Printer CPCLProgramming Manual P14-59
ip.telnet.enable
type: getvar; setvar
This parameter refers to the TELNET protocol.
getvar result Returns the TELNET protocol status. (on or off)
Example Description Instructs the printer to respond with
the TELNET setting.
Syntax ! U1 getvar “ip.telnet.enable”
Result “on”
setvar choices “on”, “off”
Default “on”
Example Description Instructs the printer to enable the
TELNET protocol.
Syntax ! U1 setvar “ip.telnet.enable” “on”
Result The TELNET protocol will be
turned on upon cycling the power
or issuing the device.reset.
ip.udp.enable
type: getvar ;setvar
This parameter refers to the UDP socket protocol.
getvar result Returns the UDP protocol status. (on or off)
Example Description This command instructs the printer
to respond with the UDP setting.
Syntax ! U1 getvar “ip.udp.enable”
Result “on”
setvar choices “on”, “off”
Default “on”
Example Description This command instructs the printer
to enable the UDP protocol.
Syntax ! U1 setvar “ip.UDP.enable” “on”
Result The UDP protocol will be turned on
upon cycling the power or issuing
the device.reset.