Zebra CPCL - USB Parameters

P14-60 Mobile Printer CPCLProgramming Manual
USB Parameters
NOTE: The following “usb.xxx” parameters are applicable only on Zebra
“QL plus” and RW series printers equipped with the USB communications op-
tion. They cannot be used on Cameo and Encore series printers which do not
support USB communications.
usb.device.device_id_string
type: getvar
This parameter refers to the manufacturer assigned
IEEE1284 Device Identification string used to describe a
particular USB product.
getvar result Returns the Device ID String stored in the USB
library.
Example Description This example retrieves the device’s
Device ID string.
Syntax ! U1 GETVAR
“usb.device.device_id_string”
Result “MFG:Zebra ;CMD:CPCL;MDL:QL
420 ;”
usb.device.device_version
type: getvar
This parameter refers to the version of the USB device
being queried.
getvar result Returns the device version stored in the USB
library.
Example Description This example retrieves the device
version value from the printer.
Syntax ! U1 GETVAR
“usb.device.device_version”
Result “0.1”