P14-68 Mobile Printer CPCLProgramming Manual
wlan.encryption_key1
type: getvar; setvar
This parameter refers to the first indexed WEP encryption
key. The WEP encryption key is a hexadecimal string
that is either 10 or 26 characters long depending on en-
cryption method (40-bit or 128 bit). This key should
match the wireless network WEP encryption key 1.
getvar result This will return the encryption first encryption key.
Example Description This command instructs the printer
respond with the encryption key
value. (This example assumes that
the printer is using 40-bit
encryption.)
Syntax ! U1 getvar “wlan.encryption_key1”
Result “0000000000”
setvar choices 10 hexadecimal characters for 40-bit encryption
26 hexadecimal characters for 128-bit encryption
Default All zeros
Example Description This command instructs the printer
to set the encryption key value.
(This example assumes that the
printer is using 40-bit encryption.)
Syntax ! U1 setvar “wlan.encryption_key1”
“A1B2C3D4F5”
Result The first encryption key will be set
to A1B2C3D4F5
continued on next page
To Next Page
Loading...