Mobile Printer CPCLProgramming Manual P14-71
wlan.encryption_key4
type: getvar; setvar
This parameter refers to the fourth indexed WEP encryp-
tion key. The WEP encryption key is a hexadecimal
string that is either 10 or 26 characters long depending
on encryption method (40-bit or 128 bit). This key should
match the wireless network WEP encryption key 4.
getvar result This will return the encryption fourth encryption
key.
Example Description This command instructs the printer
respond with the encryption key
value. (This example assumes that
the printer is using 40-bit
encryption.)
Syntax ! U1 getvar “wlan.encryption_key4”
Result “0000000000”
setvar choices 10 hexadecimal characters for 40-bit encryption
26 hexadecimal character for 128-bit encryption
Default All zeros
Example Description This command instructs the printer
to set the encryption key value.
(This example assumes that the
printer is using 40-bit encryption.)
Syntax ! U1 setvar “wlan.encryption_key4”
“A1B2C3D4F5”
Result The fourth encryption key will be
set to A1B2C3D4F5
To Next Page
Loading...