P14-76 Mobile Printer CPCLProgramming Manual
wlan.kerberos.mode
type: getvar; setvar
This parameter refers to the Kerberos network authenti-
cation protocol. Kerberos provides secure mutual au-
thentication for a wireless client through a Symbol Access
Point, based on user information stored on a Kerberos
KDC (Key Distribution Center) server.
This parameter is not supported on units with a Frequency Hopping Spread
Spectrum (FHSS) radio
getvar result This will return the current Kerberos mode.
Example Description This command instructs the printer
to respond with the current
Kerberos mode.
Syntax ! U1 getvar “wlan.kerberos.mode”
Result “off”
setvar choices “on”, “off”
Default “off”
Example Description This command instructs the printer
to turn on Kerberos mode.
Syntax ! U1 setvar “wlan.kerberos.mode”
“on”
Result This will set the Kerberos mode to
“on”.
To Next Page
Loading...
