Mobile Printer CPCLProgramming Manual P14-77
wlan.kerberos.password
type: getvar; setvar
This parameter refers to the Kerberos password. The
password must correspond to a user profile established
on the Kerberos KDC server in use.
This parameter is not supported on units with a Frequency Hopping Spread
Spectrum (FHSS) radio
getvar result This will return the Kerberos password.
Example Description This command instructs the printer
to respond with the current
Kerberos password.
Syntax ! U1 getvar
“wlan.kerberos.password”
Result “password”
setvar choices 0-32 ASCII characters
Default “password”
Example Description This command instructs the printer
to set the Kerberos password to
“password”.
Syntax ! U1 setvar
“wlan.kerberos.password” “pass–
word”
Result The Kerberos password will be set
to “password”.
To Next Page
Loading...