Zebra CPCL - wlan.kerberos.username

Mobile Printer CPCLProgramming Manual P14-79
wlan.kerberos.username
type: getvar; setvar
This parameter refers to the Kerberos user name. The
user name must correspond to a user profile established
on the Kerberos KDC server in use.
This parameter is not supported on units with a Frequency Hopping Spread
Spectrum (FHSS) radio.
getvar result This will return the Kerberos user name.
Example Description This command instructs the printer
to respond with the current
Kerberos user name.
Syntax ! U1 getvar
“wlan.kerberos.username”
Result “user”
setvar choices 0-32 ASCII characters.
Default “user”
Example Description This command instructs the printer
to set the Kerberos user name to
“user”.
Syntax ! U1 setvar
“wlan.kerberos.username” “user”
Result The Kerberos user name will be set
to “user”.