Zebra CPCL - wlan.leap_username

P14-82 Mobile Printer CPCLProgramming Manual
wlan.leap_username
type: getvar; setvar
This parameter refers to the LEAP user name. The user
name must correspond to a user profile established on
the RADIUS/AAA server in use.
This parameter is not supported on units with a Frequency Hopping Spread
Spectrum (FHSS) radio.
getvar result This will return the LEAP user name.
Example Description This command instructs the printer
to respond with the LEAP user
name.
Syntax ! U1 getvar “wlan.leap_username”
Result “user”
setvar choices 0-32 ASCII characters.
Default “user”
Example Description This command instructs the printer
to set the LEAP user name to
“user”.
Syntax ! U1 setvar “wlan.leap_username”
“user”
Result The LEAP user name will be set to
“user”.