Mobile Printer CPCLProgramming Manual P8-1
ADVANCED COMMANDS
CONTRAST Command
The CONTRAST command is used to specify the print
darkness for the entire label. The lightest printout is at
contrast level 0. The darkest contrast level is 3. The
printer defaults to contrast level 0 on power up. Contrast
level must be specified for each label file.
In order to maximize printing efficiency, always use the lowest contrast level
possible .
Format:
{command} {level}
where:
{command}:
CONTRAST
{level}:
Contrast level.
0 = Default
1 = Medium
2 = Dark
3 = Very Dark
To Next Page
Loading...