Contents
Introduction
Hello! ..................................1
What’s in the Box ............................1
Unpacking and Inspection .......................2
DC Power Supply ............................3
Printer Overview ............................4
Getting Ready to Print
Loading the Media ...........................5
Auto Calibration ...........................18
Operator Controls ...........................19
Printing a Test Label ..........................20
Hooking Up the Printer and Computer ................20
Communicating with the Printer ...................22
Using ZPL II .............................23
Adjusting the Print Width ......................23
Adjusting the Print Darkness ....................23
Adjusting the Print Speed ......................23
Troubleshooting
What the Status LED is Telling You .................25
Print Quality Problems.........................26
Manual Calibration .........................28
Troubleshooting Tests .........................29
Feed Button Modes ..........................31
Maintenance
Cleaning ................................33
Lubrication ..............................33
Parts List ...............................35
Replacing the Printhead .......................36
Specifications
Printing Specifications ........................41
• i
To Next Page
Loading...
Need help?
General
