Unpacking and Inspection
In spect the printer for pos si ble ship ping dam age:
■
Check all exterior surfaces for damage.
■
Raise the top cover (refer to “Loading the Media” on page 5) and inspect
the media compartment for damage.
In case ship ping is re quired, save the car ton and all pack ing ma te rial.
Reporting Damage
If you dis cover ship ping dam age:
■
Immediately notify and file a damage report with the shipping company.
Zebra Technologies Corporation is not responsible for any damage
incurred during shipment of the printer and will not cover the repair of
this damage under its warranty policy.
■
Keep the carton and all packing material for inspection.
■
Notify your authorized reseller.
2
To Next Page
Loading...
