Zebra DA402 - Troubleshooting; What the Status LED is Telling You

Troubleshooting
What the Status LED is Telling You
RESOLUTIONS:
1. The printer is not receiving power.
n
Have you turned on the printer power?
n
Check power connections from the wall outlet to the power supply,
and from the power supply to the printer.
2. The printer is on and in an idle state.
3. The printer has failed its power on self test (POST).
n
If this error occurs right after you turn on the printer, contact an
authorized reseller for assistance.
There is a shortage of memory.
n
If this error occurs after you have been printing, turn the printer
power off and on. Then, resume printing.
4. The printer is receiving data.
n
As soon as all of the data has been received, the status LED will
turn green; then, the printer will automatically resume operation.
25
Status LED
Condition and Color
Printer
Status
For a Resolution,
Refer to:
Off Off 1
Solid Green On 2
Flashing Yellow Stopped 3
Flashing Green Normal Operation 4
Flashing Red Stopped 5
Double Flashing Green Paused 6
Solid Yellow Various 7
Alternately Flashing Green and Red Needs Service 8