61330M Printhead Assembly Maintenance Kit
Remove the Media Cartridge
22
61311L-001 Rev. A HC100 Maintenance Manual 5/8/08
3. Did the cartridge eject this time?
4. Contact Technical Support. See Contacts on page 9.
If… Then…
Yes a. Remove the media cartridge and set aside.
b. Go to Open the Printer.
No
a. Turn off (O) the power switch.
b. Turn on (l) the power and wait for the printer to power up completely.
c. Press and hold Eject for six seconds.
d. Release Eject.
e. If the cartridge ejected, go to Open the Printer.
f. If the cartridge did not eject, continue with step 4.
To Next Page
Loading...
