Zebra HC100 - Handling the Printer

61330M Printhead Assembly Maintenance Kit
Remove the Printhead Assembly
26
61311L-001 Rev. A HC100 Maintenance Manual 5/8/08
2. See Figure 7. Lift the printhead assembly up and pull it forward ensuring the snap tabs
underneath the printhead assembly are disengaged from the printer.
Figure 7 • Close-up of Printhead Assembly Parts
1
Metal printhead lever plate
2
Underside of printhead assembly
3
Snap tabs (2)
4
Chassis slots (2)
5
Media chute
1
2
3
3
4
4
5