Zebra HC100 - Page 65

65
61337M ZebraNet™ Internal Wireless Plus Print Server Assembly Kit
Remove the Outer Enclosure and Trim
5/8/08 HC100 Maintenance Manual 61311L-001 Rev. A
Remove the Outer Enclosure and Trim
1. See Figure 37. Press each tab toward the rear to release.
2. To remove the trim plate, slide the entire trim plate assembly back slightly and lift off.
Figure 37 • Remove the Trim Plate
Note • Retain all parts removed during disassembly, unless otherwise directed.
1
Trim plate
2
Tabs
1
2
1
2
2