Zebra HC100 - Page 67

67
61337M ZebraNet™ Internal Wireless Plus Print Server Assembly Kit
Remove the Outer Enclosure and Trim
5/8/08 HC100 Maintenance Manual 61311L-001 Rev. A
5. See Figure 39. Pull the upper cover out of the printer, turn it on its side, and then pull the
outer enclosure off the printer.
Figure 39 • Remove the Outer Enclosure
1
Outer enclosure
2
Upper print mechanism cover
3
Upper print mechanism release buttons (2)
4
Main logic board (MLB)
5
User interface cable
6
Upper print mechanism arms (2)
7
Mounting post (2)
8
Ground wire
1
2
3
3
5
6
8
6
7
4