Zebra HC100 - Control Panel

Introduction to the HC100
Control Panel
18
61207L-002 B HC100 User Guide 11/15/10
Control Panel
The control panel is located on the front of the printer.
Control Panel Lights
The control panel has two basic lights that indicate the printer’s status and error conditions
(Figure 4). Printers with the Wireless Ethernet Option have an additional status indicator light.
Figure 4 • Control Panel Lights
Control Panel Buttons
The control panel has two buttons (Figure 5). Their function is described in Table 1. When you
press or press and hold a button, the printer action occurs when you release the button.
Figure 5 • Control Panel Buttons
1
Media status indicator (see Media Status Indicator on page 34)
2
Printer status indicator (outer ring) (see Printer Status Indicator on page 36)
3
Wireless status indicator (see Wireless Status Indicator on page 39)
Standard and Optional
10/100 Wired Ethernet Optional Wireless
1
3
2
1
EJECT button
2
PAUSE/FEED button
Standard and Optional
10/100 Wired Ethernet Optional Wireless
1
2