Introduction to the HC100
Media Cartridges and Wristbands
20
61207L-002 B HC100 User Guide 11/15/10
Media Cartridges and Wristbands
Different sizes, colors, and closure types of wristbands are available in recyclable media
cartridges. This information appears on the media cartridge label.
For ordering information, see Contacts on page 11. Only Genuine Zebra™ supplies will work
with your printer.
Media Cartridges
View the level of media remaining in the cartridge through the wristband supply window on
the left side of the media cartridge (Figure 6). Wristbands exit through a slot on the front of the
media cartridge.
Figure 6 • Media Cartridge
Media cartridges cannot be reused or refilled. Dispose of media cartridges in accordance with
your local regulations or standards. For information on Zebra's recycling program, see
http://www.zebra.com/environment.
1
Wristband supply window
2
Wristband exit area
Important • Forcibly pulling a wristband from the media cartridge can damage the cartridge.
A damaged cartridge will not work. If a wristband sticks out partially from a cartridge, use
scissors to cut off the exposed part so that it is flush with the cartridge. Do NOT pull the
remainder of the wristband out of the cartridge. The printer will eject the partial wristband
after the cartridge loads properly.
To Next Page
Loading...
